ZIP Tudor 4 Undersink Water Heater
- 5 or 10 litre Capacity
- Single point of use
- Adjustable temperature thermostat
- WRAS approved
Vented Water Heater
The Zip Tudor II is a vented water heater.
It is an open outlet for single point of use.
Features Tudor Vented Water Heater
Open outlet heater, for single point of use.
Externally adjustable temperature control with frost protection
Manually re-settable cutout
Connection to Zip open-outlet tapware only
Supplied with 1 metre of pre-wired cable
CFC - free insulation
Impact resistant, easy clean white plastic casing
Neon power on indicator light
Choice of 5 & 10 litre capacity
Supplied complete with wall plugs and screws
WRAS approved and CE endorsed
No need for expansion vessel or pressure relief valve.
Oversink and undersink models are not interchangeable
Product Code | Colour | Height (mm) | Width (mm) | Depth (mm) |
Thermal Loss (kWh/day |
Capacity |
T4UB5 | White | 390 | 255 | 215 | 0.32 | 5 Litres |
T4UB10 | White | 440 | 310 | 265 | 0.40 | 10 Litres |
Technical Specifications
Rating : 2.0 kW @ 230V
Heating element : Embedded rod type
Thermostat : Capillary type, adjustable 35ºC to 80ºC
Inner Container : Polypropylene tested to 1.5 bar
Case : Impact resistant plastic
Insulation : Molded CFC-free polystyrene
Approvals : WRAS approved and CE endorsed
Warranty : One year on site parts and labour.
Plumbing : Can be connected to a rising main or to a cistern with a minimum working head of 5 metres.
Electrical : To be wired to a double pole switched fused spur with a minimum break capacity of 13 amps. Installation must comply with current IEE regulations.
P4/52UB
P4/102UB