Zip Inline Instantaneous Hot Water Hand Wash Kit

Zip Inline ES Handwashing Kit

2.8kW - 5.5kW 

This Zip InLine ES handwashing packs are complete with an electronic instantaneous water heater, compatible tap, and a comprehensive plumbing kit. Which includes flexible hoses and fittings to ensure a quick and easy system installation.

Features:

• Unlimited hot water supply for handwashing
• Smart, compact design
• Heats only the water drawn off - no standing heat loss
• Stainless steel bare wire heating element for fast heat up
• Flow rate of 1.7 - 3.3 litres per minute
• Electronic power control adjusts to compensate for inlet pressure and temperature variations
• Double pole thermal cut-out protection
• For use only with taps with removable M22/M24 nozzles

Installation:

The appliance must be installed in a frost free environment. Zip ES products comply with IP25 and may be installed in zone 1. The unit should be installed as close as possible to the outlet to avoid heat loss.

The appliance is intended for connection to the mains water supply. It should be installed by a suitably qualified person. It may be used as an unvented installation or as a vented installation as described in the fitting instructions.

For correct operation, it is essential that the special tap nozzle supplied is fitted to the tap spout.

Intended for use with taps having removable M22/M24 nozzles

Not recommended for use with thermostatic mixing valves or taps.

The appliance must be earthed and connected to the mains supply by means of permanent wiring through suitable isolation having a contact separation of 3mm in all poles and may only be operated if measures have been taken to protect against shock-hazard voltages.

Installation must be installed in accordance with current IEE regulations