Stiebel Eltron DEM Set Mini Instant Water Heater
- Oversink and Undersink Installation
- Supplies One Hand Washbasin
- Accurate Temperature Delivery
- Energy Efficient
Stiebel Eltron Mini Instantaneous Water Heater
DEM 3/4/6 Set
Application
This mini instantaneous water heater with electronic closed-loop control can supply DHW to one washbasin. Operation is possible with pressure taps or non-pressurised taps.
Convenience Features
The mini instantaneous water heater has closed-loop control, control electronics, outlet temperature sensor and variable flow rate limitation. Accurate temperature delivery up to the maximum output and internal temperature limiting. Includes special aerator for perfect water flow pattern and integral flow controller for use in existing taps. Anti-scalding protection for high inlet temperatures via automatic output matching. Oversink or undersink installation possible.
Efficiency
The appliance has an electronic out control for energy efficient and water saving operation. The outlet temperature sensor and control electronics ensure that the set temperature is achieved to the exact degree. For this, only the amount of energy required is expended; there is no need to add cold water at the tap. The water is heated directly at the draw-off point and only when required, this prevents the energy and water losses caused by long pipe runs. This ensures maximum energy efficiency. Suitable for preheated water from solar thermal and heat pump systems.
Installation
With PROFI-RAPID installation system, this unit is time saving and easy to install. Straightforward wall mounting with 2-point attachment, with the back panel also serving as a drill template; slots compensate for drill hole discrepancies. The appliance cover and internal assembly can be removed with just one hand movement. Fast water connection thanks to external metal water fittings for direct, universal installation of taps. Simple electrical connection as power cable is wired up as standard. Fault analysis with LED diagnostic traffic light.
Safety
The maintenance-free bare wire heating system is suitable for hard and soft water. The safety system has a high pressure switch and electronic temperature monitoring.
Features:
- Accurate temperature delivery up to the maximum output
- Special aerator for perfect flow pattern
- Internal permanent set temperature for childproofing and anti-scalding protection
- Supplies one hand washbasin at maximum efficiency due to electronic closed-loop control
- Instant hot water thanks to rapid and maintenance-free bare wire heating system
- At inlet temperatures > 20 °C, also suitable for showers
- Suitable for oversink and undersink installation with a single appliance
- Can be operated with pressurised and non-pressurised taps
Model | SKU | Height | Width | Depth | Weight | Wattage | IP Rating |
DEM 3 Set | 236584 | 143mm | 190mm | 82mm | 1.70kg | 3.5kW | IP25 |
DEM 4 Set | 236462 | 143mm | 190mm | 82mm | 1.70kg | 4.4kW | IP25 |
DEM 6 Set | 236463 | 143mm | 190mm | 82mm | 1.70kg | 5.7kW | IP25 |